Low

MCP14E10-E/SN - 

MOSFET Driver Low Side, 4.5V-18V supply, 3A peak out, 2.8 Ohm output, SOIC-8

MCP14E10-E/SN - MOSFET Driver Low Side, 4.5V-18V supply, 3A peak out, 2.8 Ohm output, SOIC-8

圖片僅供舉例說明。 請參閱產品描述。

製造商產品編號:
MCP14E10-E/SN
訂購代碼:
1925029
技術資料表:
(EN)
查看所有技術文件

產品總覽

The MCP14E10-E/SN is a high-speed power MOSFET Driver with an enable function. It is capable of providing 3A of peak current. The dual inverting and complementary outputs are directly controlled from either TTL or CMOS. This device also features low shoot-through current, near matched rise/fall times and propagation delays, which make them ideal for high switching frequency applications. This device operates from a 4.5 to 18V single power supply and can easily charge and discharge 1800pF of MOSFET gate capacitance. It provides low enough impedance, in both the ON and OFF states, to ensure the MOSFETs intended state will not be affected even by large transients. The additional control of the driver output is allowed by the use of separate enable functions. The ENB_A and ENB_B pins are active-high and are internally pulled up to VDD. The pins may be left floating for standard operation. This device is highly latch-up resistant under any conditions within their power and voltage ratings.
  • Independent enable function for each driver output
  • Low shoot-through/cross-conduction current in output stage
  • High capacitive load drive capability
  • Short delay times
  • Low supply current
  • Logic input will withstand negative swing up to 5V

應用

Power Management, Motor Drive & Control

產品訊息

:
Low Side
:
3A
:
4.5V
:
18V
:
SOIC
:
8Pins
:
45ns
:
45ns
:
-40°C
:
125°C
:
Each
:
-
:
-
:
Yes
:
MSL 1 - Unlimited
尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

相關搜尋

170 有存貨

170 件可在 3 - 6 個工作日內出貨

查看截止時間
 
查看存貨和交貨期

300 件可於 2018/1/28 出貨

2018/4/9 當週起有更多存貨可供選購
NT$57.35 NT$ 57.35
價格
每个
多項: 1 最少: 1
數量 價格
1 + NT$57.35
10 + NT$54.00
25 + NT$44.54
100 + NT$40.58
No longer stocked:: No Longer Manufactured::

客戶評論

社群

是否要查看其他客戶所提供有關此產品的資訊?

 查看社群成員的討論、網誌、文件。

篩選:

選擇您想要查看的文件類型,並按一下「套用篩選」按鈕
張貼問題給我們的專家發起討論,並獲得供應商專家和我們社群中資深工程師的回應。