您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
SNC
Fibre Optic Stripper, Yellow, 1.6mm - 3mm Jackets
- 製造商：
- ABECO ABECO
- 製造商產品編號:
- SNC
- 訂購代碼：
- 2760468
產品訊息
技術文件 (1)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
產品總覽
The SNC from Abeco is an all-in-one unique tool designed for jacket stripping, optical fibre stripping and cutting of Kevlar strength members in one compact tool body. Three hole fibre stripper allows jacket removal from 1.6mm to 3mm cables and two additional holes for stripping 900micron tight buffer to 250micron buffer coating and standard 125micron fibre stripping (250micron removal to 125micron). Fibre stripper and Kevlar cutter slides out of the protective tool body when in use and slides back inside when not in use by activating the sliding tab located on each side of the tool. The fibre stripper and the Kevlar cutter are conveniently stored inside the tool body when not in use, for extra safety and tool life protection.
- Easy to read fibre stripping diagrams are moulded into the tool body
- Tool body has a handy moulded-in loop for attaching/hanging purposes
- Cutting surfaces are precision formed, hardened, tempered and ground assuring precise tool
- Factory set, requires no adjustment
- Dimension is 3.75inchx 1.25inch x 0.70inch (95 x 32 x 18 mm), weight is 3oz (85g)
篩選工具