您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

產品未必與您的搜尋完全相符

您先前購買過這項產品。 檢視歷史記錄

 
 

PM1

Preform Machine, Lead, 50 mm Bend Length, Guarded

CLIFF ELECTRONIC COMPONENTS PM1

圖片僅供舉例說明。 請參閱產品描述。

製造商產品編號:
PM1
訂購代碼:
147835
技術資料表:
PM1   Datasheet
查看所有技術文件

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
Lead

:
50mm

:
-

尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (1)

產品總覽

The PM1 is a component Pre-form Machine designed to cut to length and pre-form axial lead components ready for fitting into PC boards, where the component is parallel to the board. The components may be fed in bandolier form (assuming a 5mm pitch between components or multiple thereof) or loose by means of the built in chute slots. A separate plinth is available to raise the height of the machine by 80mm. Where it is not practical to site the handle over the edge of a bench. Components cut and formed without scoring or damaging the leads. Wire links can also be rapidly produced from bandoliered wire. General construction features anodised aluminium body with heavy steel sides. The free running blades are 35mm diameter and produced in M2 high speed steel. The cutting and bending wheels are n high carbon steel, all are hardened and tempered as appropriate. The machine will cut and form a comfortable and effortless 40000 components per hour.
  • Adjustable steel anvils for producing a perfect score free bend on wires up to 1mm diameter
  • Ø35mm Free running cutting wheels minimising wear and maximising efficiency and ease of use
  • Built-in scales on top of machine for pitch and down lead adjustment
  • Guards are fitted all round the cutting and bending wheels for protection of fingers

應用

Maintenance & Repair

暢銷品

開放補貨預購

依照供應商前置時間有更多存貨可提供,預計約 2021/5/17

有貨時通知我

NT$30,720.33

不提供定價。 請聯絡客戶服務

價格
每個
多項: 1 最少: 1
數量 價格 您的價格
 
 
1+ NT$30,720.33
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 新增至購物車 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --