您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

產品未必與您的搜尋完全相符

您先前購買過這項產品。 檢視歷史記錄

 
 

DFR0457

Add-On Board, MOSFET Power Controller Module, Gravity Series, Arduino, Digital Interface

DFROBOT DFR0457
DFROBOT DFR0457
DFROBOT DFR0457
DFROBOT DFR0457
×
×

圖片僅供舉例說明。 請參閱產品描述。

製造商:
DFROBOT DFROBOT
製造商產品編號:
DFR0457
訂購代碼:
2946078
產品範圍
Gravity Series
技術資料表:
DFR0457   Datasheet
查看所有技術文件

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
MOSFET Power Controller

:
Arduino IO Expansion Shield

:
Gravity Series

尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (1)

CAD 下載

×

條款與條件

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消

產品總覽

MOSFET power controller module which can drive a large current device with limited current GPIO. It works as a MOSFET relay or MOSFET driver. This is designed as some MCU, like Intel Edison, Intel joule, lilypad, Raspberry Pi and other microcontroller with limited amount of current GPIO it's hard to drive one or more relays simultaneously. The MOSFET power controller comes with a standard PH2.0-3P gravity interface. It makes the module compatible with the Arduino IO expansion shield.
  • 5V to 36V DC VIN operating voltage
  • 0A to 20A (suggest external heat sink when the current over 10A ) VIN operating current
  • 3.3 to 10V DC logic operating voltage and logic control signal
  • 0 to 1KHz switching frequency
  • PH2.0-3P interface type
  • Plug and play 3-pin Gravity interface
  • Board dimensions: 44x32mm

應用

Embedded Design & Development, Electronics Design, IoT (Internet of Things)

內容

MOSFET power controller, Gravity digital sensor cable.

註腳

Note: External heat sink is recommended for input currents over 10A

2 有存貨 需要更多?

2 UK 有庫存,可在 3-4 個工作日內發貨

由於市場條件的影響,交貨時間僅供一般指導,可能會在短時間內發生變化

NT$137.52

不提供定價。 請聯絡客戶服務

價格
每個
多項: 1 最少: 1
數量 價格 您的價格
 
 
1+ NT$137.52
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 新增至購物車 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --