您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
DFR0767
IoT Router Carrier Board, BCM2711, ARM, Cortex-A72, Raspberry Pi Compute Module
- 製造商:
- DFROBOT DFROBOT
- 製造商產品編號:
- DFR0767
- 訂購代碼:
- 3879661
產品訊息
技術文件 (0)
CAD 下載
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
產品總覽
- Provides OpenWRT open-source router system
- Compatible with Raspberry OS, Ubuntu server and other Raspberry Pi systems
- Ethernet: ETH1: compute module 4 built-In and ETH2: PCI express 1000BASE-T NIC
- 1x USB-C: power only and 1x USB-C: USB 2.0 high speed
- Storage card: microSD slot (Only modules without eMMC supported)
- GPIO: 26pin GPIO compatible with Raspberry Pi
- Power supply: USB-C 5V/3A
- Operating temperature range 0°C to 80°C
- Connected to peripherals and used as a mini-NAS, wireless network bridge, or LTE Internet terminal
內容
CM4 IoT router carrier board mini, Acrylic case with heatsink.
64 有存貨 需要更多?
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購,供應商一旦到貨,我們便隨即出貨給您。 產品發貨給您時,才向您收費。
下訂即可添購更多存貨 依照供應商前置時間,預計約 2022/10/24
由於市場條件的影響,交貨時間僅供一般指導,可能會在短時間內發生變化