您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

 
 
Low

410-202 - 

Development Board, PIC32MX795F512 MCU, USB Serial Port Interface, Mega R3 Headers

圖片僅供舉例說明。 請參閱產品描述。

製造商:
DIGILENT DIGILENT
製造商產品編號:
410-202
訂購代碼:
1893212
技術資料表:
410-202   Datasheet
查看所有技術文件

產品訊息

:
Microchip
:
32bit
:
PIC32MX795Fxxxx
:
PIC
:
PIC32
:
PIC32MX795F512L
:
IDE Software, Programmer / Debugger
:
-
尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

產品總覽

The chipKIT MAX32 development boards are the first 32bit MCU-based platforms that are compatible with existing Arduino hardware and software. The chipKIT Network Shield is an i/o expansion-board designed for use with the chipKIT Max32. It provides the additional circuitry and connectors to allow the advanced communications features of the PIC32MX795F512L on the Max32 to be utilized. It provides a 10/100Mbps Ethernet PHY to allow connection to an Ethernet network, the connectors and load switch to support use of the USB 2.0 OTG controller to implement USB device, USB host or OTG operation. It also provides 2 CAN transceivers and connectors to allow connection to 2 independent CAN networks. Connectors are provided to allow connection to 2 of the I2C busses supported by the Max32. In addition to the communications features, the Network Shield also adds a 256Kbit I2C EEPROM for non-volatile data storage and a 32.768KHz oscillator to allow use of the RTCC peripheral in the PIC32 MCU.
  • Features PIC32MX795F512L MCU
  • Compatible footprint with the Arduino Mega2560
  • Provides advanced communications and memory
  • Development using an environment based on the original Arduino IDE
  • Pin-out compatibility with many existing Arduino shields
  • Higher performance at a lower price-point than existing solutions
  • Advanced capabilities including: integrated USB (Device/Host, OTG), integrated Ethernet, CAN
  • SMSC LAN8720 10/100 Ethernet PHY
  • Two MCP2551 CAN transceivers, two 12 pin header connectors for CAN, two I2C daisy chain connectors
  • 256Kbit I2C EEPROM, 32.768 KHz oscillator

應用

Communications & Networking, Wireless, Sensing & Instrumentation, Motor Drive & Control, Hobby & Education

警告

Applying more than 6V to the external power I/P destroy 3.3V regulator when jumper in BYP position

410-202 的替代選擇

比較選取項目
製造商產品編號
訂購代碼
製造商 / 描述
可用性
項目價格
數量

相關產品

比較選取項目

相關搜尋

81 有存貨

81 件可在 3 - 6 個工作日內出貨
 
查看存貨和交貨期

2019/8/5 當週起有更多存貨可供選購

NT$1,882.78

不提供定價。 請聯絡客戶服務

價格
每個
多項: 1 最少: 1
數量 價格 您的價格
 
 
1+ NT$1,882.78
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 無現貨,延期交貨 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --

客戶評論

社群

是否要查看其他客戶所提供有關此產品的資訊?

 查看社群成員的討論、網誌、文件。

篩選:

選擇您想要查看的文件類型,並按一下「套用篩選」按鈕
張貼問題給我們的專家發起討論,並獲得供應商專家和我們社群中資深工程師的回應。