AP2210K-5.0TRG1

AP2210K-5.0TRG1 is a 300mA RF ULDO regulator that provides very low noise, ultra-low dropout voltage (typically 250mV at 300mA), very low standby current (1µA maximum), and excellent power supply ripple rejection (PSRR 75dB at 100Hz). This device is used in battery-powered applications, such as handsets and PDAs; and in noise-sensitive applications, such as RF electronics. It also features individual logic compatible enable/shutdown control inputs, a low power shutdown mode for extended battery life, overcurrent protection, overtemperature protection, and reverse current protection. It is used in applications such as cellular phones, cordless phones, wireless communicators, PDAs/palmtops, PC motherboards, and consumer electronics.

• Excellent ESR stability, low standby current, logic-controlled enable
• Tight load and line regulation, low temperature coefficient
• Over-current protection, thermal protection, reverse current protection
• Moisture sensitivity: Level 3 Per J-STD-020, supply input voltage range from 2.5V to 13.2V
• Line regulation is 1.5mV typical at (VIN = 3.5V to 13.2V)
• Load regulation is 10mV typical at (IOUT = 0.1mA to 300mA)
• Ripple rejection is 75dB typical at (f = 100Hz, IOUT = 100µA)
• Output noise is 260nV /Hz typical at (IOUT = 50mA, COUT = 2.2µF, 100pF from BYP to GND)
• Current limit is 450mA typical at (VOUT = 0V, (VIN = 3.5V, IOUT = 100µA)
• Operating temperature range from -40°C to +85°C, SOT-23-5 package

警告

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.