您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
C1206X471KGRACAUTO
SMD Multilayer Ceramic Capacitor, 470 pF, 2 kV, 1206 [3216 Metric], ± 10%, X7R, X Series FT-CAP
- 製造商：
- KEMET KEMET
- 製造商產品編號:
- C1206X471KGRACAUTO
- 訂購代碼：
- 2834531
- 產品範圍
- X Series FT-CAP
- 技術資料表:
- C1206X471KGRACAUTO Datasheet
產品訊息
技術文件 (3)
產品總覽
KEMET's Automotive Grade High Voltage Surface Mount MLCCs with Flexible Termination (HV FT-CAP) address the primary failure mode of MLCCs - flex cracks, which are typically the result of excessive tensile and shear stresses produced during board flexure and thermal cycling. Featuring several of the highest CV (capacitance/voltage) values available in the industry, these devices utilize a pliable and conductive silver epoxy between the base metal and nickel barrier layers of the termination system. The addition of this epoxy layer inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks which can result in low IR or short circuit failures. Although flexible termination technology does not eliminate the potential for mechanical damage that may propagate during extreme environmental and handling conditions, it does provide superior flex performance over standard termination systems.
- AEC-Q200 automotive qualified
- Operating temperature range from -55°C to +125°C
- Superior flex performance (up to 5 mm)
- Exceptional performance at high frequencies
- Low ESR and ESL
篩選工具