您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
EA 3422 A&B, 50ML
Adhesive, Epoxy, White / Yellow, Room Temperature, 4200 psi, Cartridge, 50 ml
產品訊息
技術文件 (2)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
產品總覽
LOCTITE® EA 3422 is a pale yellow/white translucent colour (when mixed), 2-part, slightly thixotropic epoxy adhesive which cures rapidly at room temperature after mixing. It is a general purpose, non-sag adhesive which develops high strength on a wide range of substrates. Gap filling makes this adhesive suitable for rough or poorly fitting surfaces made from metals, ceramic, rigid plastics or wood.
- General purpose, non-sag adhesive
- Develops high strength on a wide range of substrates
- Fixture time is 7min, fixture time temperature is 22°C
- Mix ratio is 1:1 (by volume)
- Epoxy technology and chemical type
- Two part - resin and hardener
- Mix ratio by weight is 100 : 100 (resin : hardener)
篩選工具