您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

產品未必與您的搜尋完全相符

您先前購買過這項產品。 檢視歷史記錄

 
 

DS1312S+

Memory Controller, Nonvolatile SRAM, 10% Voltage Tolerance, 4.5V to 5.5V Supply, WSOIC-16

MAXIM INTEGRATED PRODUCTS DS1312S+
×

圖片僅供舉例說明。 請參閱產品描述。

製造商產品編號:
DS1312S+
訂購代碼:
2517216
技術資料表:
DS1312S+   Datasheet
查看所有技術文件

產品總覽

The DS1312S+ is a non-volatile controller with lithium battery monitor in 16 pin WSOIC package. This non-volatile controller with battery monitor is a CMOS circuit which solves application problem of converting CMOS RAM into non-volatile memory. Incoming power is monitored for an out of tolerance condition. When such a condition is detected, chip enable is inhibited to accomplish write protection and the battery is switched on to supply the RAM with uninterrupted power. Special circuitry uses a low leakage CMOS process which affords precise voltage detection at extremely low battery consumption. In addition to battery backup support device performs important function of monitoring remaining capacity of lithium battery and providing a warning before battery reaches end of life.
  • Supply voltage range is 4.5V to 5.5V, voltage tolerance of 10%
  • Operating temperature range from -40°C to 85°C
  • Converts CMOS SRAM into non-volatile memory
  • Unconditionally write protects SRAM when VCC is out of tolerance
  • Automatically switches to battery backup supply when VCC power failure occurs
  • Monitors voltage of a lithium cell and provides advanced warning of impending battery failure
  • Signals low battery condition on active low battery warning output signal
  • Space saving package
  • Resets processor when power failure occurs, hold processor in reset during system power-up

應用

Embedded Design & Development

警告

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
Nonvolatile SRAM

:
10%

:
4.5V

:
5.5V

:
WSOIC

:
16Pins

:
-40°C

:
85°C

:
-

:
MSL 1 - Unlimited
尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (1)

CAD 下載

×

條款與條件

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消

開放補貨預購

依照供應商前置時間有更多存貨可提供,預計約 2022/10/17

有貨時通知我

NT$372.79

不提供定價。 請聯絡客戶服務

價格
每個
多項: 1 最少: 1
數量 價格 您的價格
 
 
1+ NT$372.79
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
10+ NT$342.57
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
25+ NT$332.81
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 新增至購物車 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --