您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
MAX9176EUB+
Analog Multiplexer, 2:1, 1 Circuit, 3V to 3.6V, µMAX-10
產品總覽
The MAX9176EUB+ is a 670MHz LVDS to LVDS 2:1 multiplexers in 10 pin µMAX package. This low jitter, low skew multiplexer is ideal for protection switching, loopback and clock distribution. The device has ultra low 68ps peak to peak deterministic jitter that ensures reliable operation in high speed links that are highly sensitive to timing errors. The MAX9176 has fail-safe LVDS inputs and an LVDS output. The output can be put into high impedance using power-down input. The device also has fail-safe circuits that drive output high when a selected input is open, undriven and shorted or undriven and terminated. The select and power-down inputs tolerate undershoot of -1V and overshoot of VCC + 1V. it operate from a single 3.3V supply over the -40°C to +85°C temperature range.
- Supply voltage range from 3V to 3.6V
- 1.0ps(RMS) jitter (maximum) at 670MHz and 68ps(P-P) jitter at 800Mbps data rate
- Low power CMOS design
- Maximum switching frequency of 670MHz and maximum data rate of 800Mbps
- IEC61000-4-2 level 4 ESD rating
- Rise time of 320ps and fall time of 340ps
- Offset voltage of 1.25V and fail-safe differential output voltage of 393mV
- 26mA supply current, 0.5µA power-down supply current & 38mA (fIN = 670MHz) switching supply current
- Added random jitter of 0.7ps(RMS) and pulse skew of 27ps
- Conform to ANSI TIA/EIA-644 LVDS standard
應用
Signal Processing, Communications & Networking
產品訊息
技術文件 (1)
篩選工具