您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
MAX922CSA+
Analogue Comparator, Low Voltage, Micropower, 2 Comparators, 12 µs, 2.5V to 11V, ± 1.25V to ± 5.5V
產品總覽
The MAX922CSA+ is a dual micropower low voltage comparator in 8 pin NSOIC package. This ultra low power comparator draws less than 4µA supply current over temperature and TTL/CMOS outputs that sink and source current. It is ideal for 3V or 5V single supply applications and each comparator's input voltage range swings from negative supply rail to within 1.3V of positive supply. The unique output stage of MAX922 continuously sources 40mA current and by eliminating power supply glitches that commonly occur when comparators change logic states, MAX922 minimize parasitic feedback which makes it easier to use. It is used in battery powered systems, threshold detectors, window comparators and oscillator circuits.
- Single supply voltage range from 2.5V to 11V and dual supply voltage range from ±1.25V to ±5.5V
- Operating temperature range from 0°C to 70°C
- Input voltage range includes negative supply
- 12µs propagation delay at 10mV overdrive (5V operation)
- No switching crowbar current
- Supply current of 2.5µA at TA = +25°C (5V operation)
- Input offset voltage of ±10mV
- Common mode rejection ratio of 0.1mV/V and power supply rejection ratio of 0.1mV/V
- Comparator voltage noise of 20µVrms at 100Hz to 100KHz
應用
Signal Processing
產品訊息
技術文件 (1)
開放補貨預購
篩選工具