您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

產品未必與您的搜尋完全相符

您先前購買過這項產品。 檢視歷史記錄

 
 

MIC2954-03WS-TR

Fixed LDO Voltage Regulator, 2V to 30V, 375mV Dropout, 5Vout, 250mAout, SOT-223-3

MICROCHIP MIC2954-03WS-TR
×
×

圖片僅供舉例說明。 請參閱產品描述。

製造商產品編號:
MIC2954-03WS-TR
訂購代碼:
2510050RL
產品範圍
5V 250mA LDO Voltage Regulators
查看所有技術文件

產品總覽

The MIC2954-03WS TR is a 250mA low-Dropout Regulator with a very low dropout voltage (typically 40mV at light loads and 375mV at 250mA) and low quiescent current. The quiescent current of the regulator increases only slightly in dropout, thus prolonging battery life. This features include protection against reversed battery, fold-back current limiting and automotive load-dump protection (60V positive transient). It is an adjustable version that includes an error flag output that warns of a low output voltage, which is often due to failing batteries on the input. This may also be used as a power-on reset. A logic-compatible shutdown input is provided which enables the regulator to be switched ON and OFF. This part may be pin-strapped for 5V output or programmed from 1.24 to 29V with the use of two external resistors.
  • Low quiescent current
  • Low dropout voltage
  • Extremely tight load and line regulation
  • Very low temperature coefficient
  • Current and thermal limiting
  • Error flag warns of low output voltage
  • Logic-controlled electronic shutdown

應用

Power Management, Computers & Computer Peripherals, Automotive, Portable Devices

警告

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
Fixed

:
2V

:
30V

:
5V

:
-

:
-

:
250mA

:
375mV

:
SOT-223

:
3Pins

:
-40°C

:
125°C

:
5V 250mA LDO Voltage Regulators

:
-

:
MSL 3 - 168 hours
尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (2)

CAD 下載

×

條款與條件

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消
包裝類型 複捲式包裝
  提供其他包裝選項
條帶式包裝 :2510050 查看存貨

開放補貨預購

送貨日期自 2022/2/19

有貨時通知我

NT$54.04

不提供定價。 請聯絡客戶服務

價格
件(切割供貨)
多項: 1 最少: 100
數量 價格 您的價格
 
 
100+ NT$54.04
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 新增至購物車 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --
100 (條帶式包裝 2510050) x 54.04 = NT$5,404.00
總價: NT$5,404.00
您所訂購的數量有部份或全部將延期交貨。 請參閱「查看存貨和交貨期」,以瞭解詳情。
100 (複捲式包裝 2510050RL) x 54.04 = NT$5,404.00
總價: NT$5,404.00
您所訂購的數量有部份或全部將延期交貨。 請參閱「查看存貨和交貨期」,以瞭解詳情。
選擇您的包裝偏好
2510050
注意:偏遠倉庫可能提供不同包裝選項的出貨。 請查看每一包裝選項的送貨和交貨期資訊。