您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
RPI-COMPUTE3-LT
Development Board, Raspberry Pi Compute Module 3 Lite, DDR2-SODIMM Mechanically Compatible SoM
RPI-COMPUTE3-LT 的替代選擇
產品訊息
技術文件 (3)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
產品總覽
The Raspberry Pi Compute Module 3 Lite (CM3L) is a DDR2-SODIMM-mechanically-compatible System on a Module (SoMs) containing processor, memory, and supporting power circuitry. This module allows a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form factors. In addition this module has an extra IO interface over and above what is available on the Raspberry Pi model A/B boards opening up more options for the designer. The Compute Module 3 Lite contains the following components contained within a 200 pin SODIMM design:
- Broadcom BCM2837 processor
- 1Gbyte LPDDR2 RAM
- 35µ Hard gold plated I/O Pins
註腳
Note: when operating with the IO Board, an SD card with a suitable image must be connected to the IO board for the system to work
无库存
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
篩選工具