您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
ASM330LHHTR
MEMS Module, ASM330LHH Series, IMU, 2 V to 3.6 V, ± 16g, LGA-14
產品總覽
ASM330LHHTR is a Automotive 6-axis inertial module (system-in-package) featuring a 3D accelerometer and 3D gyroscope. MEMS sensor modules leverages the robust and mature manufacturing processes already used for production of micro machined accelerometers and gyroscopes to serve both automotive and consumer market. The ASM330LHH is AEC-Q100 compliant and industrialized through a dedicated MEMS production flow to meet automotive reliability standards. It is fully tested with respect to temperature to ensure the highest quality level. All the design aspects of the ASM330LHH have been optimized to reach superior output stability, extremely low noise and full data synchronization to the benefit of sensor-assisted applications like dead reckoning and sensor fusion. Typical application include dead reckoning, V2X, telematics, eTolling, anti-theft systems, impact detection and crash reconstruction, motion-activated functions, driving comfort, vibration monitoring and compensation.
- AEC-Q100 qualified
- Extended temperature range from -40 to +105°C
- Embedded compensation for high stability over temperature
- Accelerometer user-selectable full scale up to ±16g
- Extended gyroscope range from ±125 to ±4000dps
- SPI & I²C host serial interface
- Six-channel synchronized output to enhance accuracy of dead-reckoning algorithms
- Smart programmable interrupts
- Embedded 3Kbytes FIFO available to underload host processor
- 14 lead LGA package and dimension 2.5mm x 3.0mm x 0.83mm
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
產品訊息
技術文件 (2)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
暢銷品
包裝類型
條帶式包裝
33,762 有存貨 需要更多？
×
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
下訂即可添購更多存貨 依照供應商前置時間，預計約 2023/10/9
7,614 新加坡 有庫存，可在 1-2 個工作日內發貨
26,148 英國 有庫存，可在 3-4 個工作日內發貨
26,148 英國 有庫存，可在 3-4 個工作日內發貨
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
篩選工具