您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
DAC8551IADGKTG4
Digital to Analogue Converter, 16 bit, 200 kSPS, Serial, 2.7V to 5.5V, SOP, 8 Pins
- 製造商產品編號:
- DAC8551IADGKTG4
- 訂購代碼：
- 3118664
產品總覽
The DAC8551IADGKTG4 is a small low-power voltage output 16-bit Digital-to-analog Converter (DAC) provides good linearity and minimizes undesired code-to-code transient voltages. The DAC8551 uses a versatile 3-wire serial interface that operates at clock rates to 30MHz and is compatible with standard SPI™, QSPI™, MICROWIRE™ and digital signal processor (DSP) interfaces. The DAC8551 requires an external reference voltage to set its output range. The DAC8551 incorporates a power-on-reset circuit that ensures the DAC output powers up at 0V and remains there until a valid write takes place to the device. The DAC8551 contains a power-down feature, accessed over the serial interface that reduces the current consumption of the device to 200nA at 5V. The low-power consumption of this device in normal operation makes it ideally suited for portable, battery-operated equipment. The power consumption is 0.38mW at 2.7V, reducing to less than 1µW in power-down mode.
- Relative accuracy - 3LSB
- Glitch energy - 0.1nV-s
- Power-on reset to 0
- Settling time - 10µs to ±0.003%FSR
- Low-power serial interface with Schmitt-triggered inputs
- On-chip output buffer amplifier with rail-to-rail operation
- Power-down capability
- Binary input
- SYNC interrupt facility
- Green product and no Sb/Br
應用
Automation & Process Control, Motor Drive & Control, Portable Devices, Computers & Computer Peripherals
產品訊息
技術文件 (0)
篩選工具