您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
TRINAMIC / ANALOG DEVICES TMCM-1617-GRIP-REF
Reference Design Board, TMCM-1617, 3 Phase BLDC & PMSM Motor Controller
產品總覽
TMCM-1617-GRIP-REF is an open source hardware reference design for the TMCM-1617 BLDC servo driver. To be used in robotic gripper applications, the board is designed in a standard gripper electronics form-factor. It is able to control a BLDC motor via EtherCAT®, IO-Link® or RS485 using Trinamic's TMCL protocol. In addition, the board features 1 configurable analogue output and 1 configurable analogue input, using Maxim's MAX22000 industrial configurable analogue I0 device and 4 configurable digital input, digital outputs, using Maxim's MAX14906 device.
- Single axis BLDC servo driver for up to 2.5A RMS motor current
- 24V nominal supply voltage (+20V to +28V)
- Digital hall sensor interface
- ABN encoder interface
- 4 digital +24V I/O (high side switch, push-pull driver, or a Type 1 and 3, or Type 2 digital input)
- One analogue output (±12.5V output voltage range, or ±25mA or ±2.5mA output current range)
- One differential analogue input (±15V, ±2.5V, ±500mV, ±250mV and ±125mV input voltage ranges)
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
產品訊息
技術文件 (2)
6 有存貨 需要更多？
×
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
下訂即可添購更多存貨 依照供應商前置時間，預計約 2024/12/2
6 英國 有庫存，可在 3-4 個工作日內發貨
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
篩選工具