您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
75-38118
Plastic Enclosure, Instrument, ABS, 146.5 mm, 206.14 mm, 39.4 mm
產品訊息
技術文件 (1)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
產品總覽
The 75-38118 is a light grey APOLLO Case made of ABS (Acrylonitrile Butadiene Styrene). The plastic injection moulded top and base sections clip together, without the use of screws, to provide the basic construction. The plastic front and rear panels can be fitted in a recessed, flush or projecting position according to individual preference requirements. Located in the shell mouldings are two pre-set drilling points specifically designed to cater for wall mounting applications. A hole is incorporated at these points to act as an accurate centre drill. The illustration gives the relevant dimensions.
- UL94-HB Flammability rating
- -40 to 80°C Temperature range
應用
Industrial
內容
Top moulding, Base moulding, 4x PCB mounting clips, Plastic panel, Aluminium panel and 4x Self-adhesive feet.
開放補貨預購
依照供應商前置時間有更多存貨可提供，預計約 2022/9/19
×
6
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
篩選工具