UCC28630D

The UCC28630D is a high power Fly-back Converter with primary-side regulation and peak power mode. The powerful gate driver and ability to operate in both CCM and DCM make the device suitable for applications with a wide power range. The peak power mode allows transient peak power delivery up to 200% of nominal rating, with only a 25% peak current increase, maximizing transformer utilization. The transformer bias winding is used to sense output voltage for regulation and for low-loss input voltage sensing. Advanced sampling and processing techniques allow CCM operation and deliver excellent output voltage regulation performance for opto-coupler-less designs at power levels of 100W and above. Advanced light-load modes are deployed to reduce both controller and system power consumption at no load and light load. These modes enable potential system designs to meet 30mW no-load power for power designs up to 30W nominal, 60W peak.

• High-power, primary-side regulation for output voltage and current, no optocoupler required
• Continuous conduction mode and discontinuous conduction mode operation
• Active X-capacitor discharge function
• Adjustable constant-current mode limiting
• Peak-power mode for transient overload
• Shutdown pin interface for external NTC
• Frequency dither to ease EMI compliance
• High gate drive current 1A source and 2A sink
• Low power modes for <lt/>30mW system standby
• Best-in-class light load (10%) efficiency <gt/>85% for 65W nominal power design
• Green product and no Sb/Br

應用

Computers & Computer Peripherals, Consumer Electronics, Power Management, Industrial