AD7770ACPZ

AD7770 is an 8-channel, simultaneous sampling ADC. Eight full sigma-delta (Σ-Δ) ADCs are on chip. The AD7770 provides a low input current to allow direct sensor connection. Each input channel has a programmable gain stage allowing gains of 1, 2, 4 and 8 to map lower amplitude sensor outputs into the full-scale ADC input range, maximizing the dynamic range of the signal chain. The AD7770 accepts a VREF voltage from 1V up to 3.6V. The analogue inputs accept unipolar (0V to VREF) or true bipolar (±VREF/2) analogue input signals with 3.3V or ±1.65V analogue supply voltages, respectively for PGAGAIN = 1. The analogue inputs can be configured to accept true differential, pseudo differential or single-ended signals to match different sensor output configurations. Typical applications include protection relays, general-purpose data acquisition and industrial process control.

• Low DC input current: ±4nA (differential) and ±8nA (single-ended)
• Up to 32KSPS output data rate (ODR) per channel and programmable ODRs and bandwidth
• Sample rate converter (SRC) for coherent sampling, sampling rate resolution up to 15.2 × 10¯⁶SPS
• Low latency sinc3 filter path, adjustable phase synchronization and internal 2.5V reference
• High resolution mode and low power mode optimizing power dissipation and performance
• Low resolution successive approximation register (SAR) ADC for system and chip diagnostics
• Bipolar (±1.65V) or unipolar (3.3V) supplies and digital input/output (I/O) supply: 1.8V to 3.6V
• 103dB dynamic range at 32KSPS in high resolution, -109dB THD, ±9ppm of FSR INL, ±15µV offset error
• ±0.1%FS gain error and ±10 ppm/°C typical temperature coefficient
• 64 lead LFCSP package, operating temperature range from -40 to 125°C

附註

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party