LTC6992CS6-4#TRMPBF

LTC6992-4 is a TimerBlox voltage-controlled pulse width modulator (PWM). It is a silicon oscillator with an easy-to-use analogue voltage-controlled pulse width modulation (PWM) capability. This part of the TimerBlox® family of versatile silicon timing devices. A single resistor, RSET, programs the LTC6992’s internal host oscillator frequency. The output frequency is determined by this host oscillator and an internal frequency divider, NDIV, programmable to eight settings from 1 to 16384. Applying a voltage between 0V and 1V on the MOD pin sets the duty cycle. The four versions differ in their minimum/maximum duty cycle. Application includes PWM servo loops, heater control, LED dimming control, high vibration, high acceleration environments, portable and battery-powered equipment.

• Pulse width modulation (PWM) controlled by simple 0V to 1V analogue input
• Frequency range from 3.81Hz to 1MHz
• Configured with 1 to 3 resistors, <lt/>1.7% maximum frequency error
• 5% to 100% PWM duty cycle range
• Frequency modulation (VCO) capability
• 365µA typical supply current (RL = ∞, RSET = 50k, NDIV = 1, V+ = 5.5V, TA = 25°C)
• 500μs start-up time, CMOS output driver sources/sinks is 20mA
• 3.81 to 1000000Hz output frequency range (TA = 25°C)
• 2.25V to 5.5V operating supply voltage range (TA = 25°C)
• 6 lead plastic TSOT-23 package, temperature range from 0°C to 70°C

附註

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party