MAX11201AEUB+

The MAX11201AEUB+ is a 24bit, single channel, ultra low power, delta-sigma analogue to digital converter (ADC) with buffer in 10 pin µMAX package. This high resolution, serial output ADC operates from 2.7V to 3.6V analogue and 1.7V to 3.6V digital supply range. It provides highest resolution per unit power in industry and it is optimized for applications that require very high dynamic range with low power such as sensors on 4mA to 20mA industrial control loop. This MAX11201 provides high accuracy internal oscillator that requires no external components. When used with the specified data rates, the internal digital filter provides more than 100dB rejection of 50Hz or 60Hz line noise. The device is used in sensor measurement (temperature and pressure), portable instrumentation, weigh scales and battery applications.

• No missing codes, ±2KV ESD protection
• Operating temperature range from -40°C to 85°C
• Serial 2-wire interface (clock Input and data output)
• INL of ±10ppmFSR, zero error of ±10ppmFSR and full scale error of ±20ppmFSR
• Operating mode current drain of <lt/> 300μA and sleep mode current drain of <lt/> 0.4μA
• 23.3bit ENOB, 20.6bit noise free resolution at 13.75sps, 19.1bit noise free resolution at 120sps
• Fully differential signal and reference I/P, high-impedance I/P and buffers on signal I/P
• Programmable internal system clock or external clock 2.4576MHz
• Total operating current of 245μA, 20sps output rate
• CMRR of 123dB (DC rejection), PSRR of 100dB (DVDD DC rejection) and 80dB (AVDD DC rejection)

應用

Signal Processing, Consumer Electronics, Portable Devices

附註

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party