AP2202K-3.3TRG1

AP2202K-3.3TRG1 is a 150mA ULDO regulator which provides very low noise, ultra-low dropout voltage (typically 165mV at 150mA), very low standby current (1µA maximum), and excellent power supply ripple rejection (PSRR 75dB at 100Hz). This device is used in battery-powered applications, such as handsets and PDAs, and in noise-sensitive applications, such as RF electronics. It also features logic-compatible enable/shutdown control inputs, a low-power shutdown mode for extended battery life, overcurrent protection, overtemperature protection, and reverse current protection. Applications include cellular phones, cordless phones, digital still cameras, wireless communicators, PDAs/palmtops, PC motherboards, and consumer electronics.

• Low standby current, tight load and line regulation
• Low temperature coefficient, overcurrent protection, thermal protection
• Reverse current protection, logic-controlled enable
• Output voltage temperature coefficient is 120µV/°C typ at -40°C ≤ TJ ≤ +125°C
• Standby current is 0.01µA typ at VEN ≤ 0.4V (shutdown)
• Ripple rejection is 75dB typ at frequency = 100Hz, IOUT = 100µA
• Output noise is 260nV / √Hz typ at IOUT = 50mA, COUT = 2.2µF, 100pF from BYP to GND
• 3.3V fixed output voltage
• SOT-23-5 package
• Temperature range from -40 to +125°C

Warnings

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.