IS25LP032D-JKLE

IS25LP032D-JKLE is a 32Mb serial flash memory with 133MHZ multi I/O SPI and quad I/O QPI DTR interface. It offers a versatile storage solution with high flexibility and performance in a simplified pin count package. ISSI’s “Industry Standard Serial Interface” flash is for systems that require limited space, a low pin count, and low power consumption. The device is accessed through a 4-wire SPI interface consisting of a serial data input (SI), serial data output (SO), serial clock (SCK), and chip enable (CE#) pins, which can also be configured to serve as multi-I/O. This series of flash adds support for DTR (double transfer rate) commands that transfer addresses and read data on both edges of the clock. These transfer rates can outperform 16-bit parallel flash memories allowing for efficient memory access to support XIP (execute in place) operation.

• 256bytes per programmable page, supports serial flash discoverable parameters (SFDP)
• 532MHz equivalent QPI, DTR (dual transfer rate) up to 66MHz
• Selectable dummy cycles, configurable drive strength, supports SPI modes 0 and 3
• More than 100,000 erase/program cycles, more than 20-year data retention
• Program 1 to 256bytes per page, program/erase suspend and resume
• Selectable burst length, QPI for reduced instruction overhead, AutoBoot operation
• Single voltage supply range from 2.30V to 3.60V, 4mA active read current (typ)
• Software and hardware write protection, power supply lock protect, 128bit unique ID for each device
• 8-contact WSON package
• Extended temperature range from -40°C to +105°C