您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
ICM-20948
MEMS Module, MotionTracking Series, 9-Axis Device, ±16g, 1.71 V to 3.6 V, QFN-24
產品總覽
The ICM20948 is the world's lowest power 9 axis MotionTracking device that is ideally suited for Smartphones, Tablets, Wearable Sensors, and IoT applications. ICM20948 supports an auxiliary I2C interface to external sensors, on-chip 16bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features an operating voltage range down to 1.71V. Communication ports include I2C and high speed SPI at 7MHz
- Lowest Power 9 Axis Device at 2.5mW
- 3 Axis Gyroscope with Programmable FSR of ±250 dps, ±500 dps, ±1000 dps, and ±2000 dps
- 3 Axis Accelerometer with Programmable FSR of±2g, ±4g, ±8g, and ±16g
- 3 Axis Compass with a wide range to ±4900 µT
- Onboard Digital Motion Processor (DMP)
- Android support
- Auxiliary I2C interface for external sensors
- On-Chip 16-bit ADCs and Programmable Filters
- 7MHz SPI or 400kHz Fast Mode I²C
- Digital-output temperature sensor
- VDD operating range of 1.71V to 3.6V
- MEMS structure hermetically sealed and bonded at wafer leve
應用
Consumer Electronics, Computers & Computer Peripherals
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
產品訊息
技術文件 (1)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
暢銷品
包裝類型
條帶式包裝
開放補貨預購
依照供應商前置時間有更多存貨可提供，預計約 2023/8/21
×
28
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
| 數量 | 價格 | 您的價格 |
|---|---|---|
| 1+ | NT$386.90 | |
| 5+ | NT$339.35 | |
| 10+ | NT$305.42 | |
| 25+ | NT$271.49 | |
| 50+ | NT$251.13 | |
| 100+ | NT$217.20 | |
| 500+ | NT$203.62 | |
| 1000+ | NT$190.04 | |
不提供定價。 請聯絡客戶服務。
篩選工具