您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

產品未必與您的搜尋完全相符

您先前購買過這項產品。 檢視歷史記錄

 
 

MPU-6050

MEMS Module, MotionTracking Series, 3-Axis Gyroscope/Accelerometer, ±16g, 2.375 V to 3.46 V, QFN-24

TDK INVENSENSE MPU-6050
×
×

圖片僅供舉例說明。 請參閱產品描述。

製造商產品編號:
MPU-6050
訂購代碼:
1864742
技術資料表:
MPU-6050   数据表
查看所有技術文件

產品總覽

The MPU-6050 incorporates InvenSense's MotionFusion and run-time calibration firmware that enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices in motion-enabled products, and guarantees that sensor fusion algorithms and calibration procedures deliver optimal performance for consumers. The MPU-6050 device combines a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor (DMP) capable of processing complex 9-axis MotionFusion algorithms. The parts' integrated 9-axis MotionFusion algorithms access external magnetometers or other sensors through an auxiliary master I2C bus, allowing the devices to gather a full set of sensor data without intervention from the system processor.
  • User-programmable digital filters for gyroscope, accelerometer, and temp sensor
  • Digital-output temperature sensor
  • 9-Axis MotionFusion by the on-chip digital motion processor (DMP)
  • Auxiliary master I2C bus for reading data from external sensors
  • Minimal cross-axis sensitivity between the accelerometer and gyroscope axes
  • MEMS structure hermetically sealed and bonded at wafer level
  • 10,000 g shock tolerant
  • 400kHz fast mode I2C for communicating with all registers

應用

Consumer Electronics, Sensing & Instrumentation, Automation & Process Control, System Monitoring, Robotics

警告

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
Tri-Axis Gyroscope, Tri-Axis Accelerometer

:
2.5V

:
3.6V

:
QFN

:
24Pins

:
± 250°/s, ± 500°/s, ± 1000°/s, ± 2000°/s

:
± 2g, ± 4g, ± 8g, ± 16g

:
-

:
MSL 3 - 168 hours

尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (1)

CAD 下載

×

條款與條件

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消
暢銷品
包裝類型 條帶式包裝

開放補貨預購

送貨日期自 2023/5/7

由於市場條件的影響,交貨時間僅供一般指導,可能會在短時間內發生變化

有貨時通知我

NT$276.11

不提供定價。 請聯絡客戶服務

價格
件(切割供貨)
多項: 1 最少: 1
數量 價格 您的價格
 
 
1+ NT$276.11
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
10+ NT$248.17
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
25+ NT$220.55
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
50+ NT$203.98
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
100+ NT$176.72
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
500+ NT$165.33
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
1000+ NT$154.63
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
5000+ NT$146.69
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 新增至購物車 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --