您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
MAX9140AAUK+T
Analogue Comparator, Rail to Rail I/P, High Speed, 1 Comparator, 40 ns, 2.7V to 5.5V, SOT-23
產品總覽
The MAX9140AAUK+T is a low power, rail to rail, single high speed comparator in 5 pin SOT-23 package. This single supply comparator is optimized for systems powered from 3V or 5V supply. It combines high speed, low power and rail to rail inputs. The input common mode range of the device extends beyond both power supply rails. The output pulls to within 0.3V of either supply rail without external pull-up circuitry making this device ideal for interface with both CMOS and TTL logic. All input and output pins can tolerate a continuous short circuit fault condition to either rail. Internal hysteresis ensures clean output switching even with slow moving input signals. The MAX9140 is higher speed, lower power and lower cost upgrades to industry standard MAX941/MAX942/MAX944 comparators. It is used in line receivers, battery powered systems, threshold detectors/discriminators, 3V/5V systems, zero crossing detectors and sampling circuits.
- Supply voltage range is 2.7V to 5.5V
- Operating temperature range from -40°C to 125°C
- Fast propagation delay of 40ns (10mV overdrive)
- 360µA supply current per comparator (VCM = VCC = 3V)
- Outputs swing of 300mV of power rails
- Input offset voltage of 6mV and input offset current of 140nA
- CMRR of 850µV/V at VCC = 5.5V and PSRR of 800µV/V at 2.7V <= VCC <= 5.5V
應用
Signal Processing
產品訊息
技術文件 (2)
2,219 有存貨 需要更多？
×
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
下訂即可添購更多存貨 依照供應商前置時間，預計約 2021/3/22
有 2,219 件可在 3 - 4 個工作日內出貨
1 (條帶式包裝 2515174) x 50.11 = NT$50.11
總價: NT$50.11
選擇您的包裝偏好
篩選工具