MT29F2G08ABAEAWP:E

MT29F2G08ABAEAWP:E is a NAND flash memory. This NAND flash device includes an asynchronous data interface for high-performance I/O operations. This device uses a highly multiplexed 8-bit bus (I/Ox) to transfer commands, address, and data. A target is the unit of memory accessed by a chip enable signal. A target contains one or more NAND flash dies. A NAND flash die is the minimum unit that can independently execute commands and report status. This device has an internal 4-bit ECC that can be enabled using the GET/SET features.

• Open NAND flash interface (ONFI) 1.0-compliant
• Single-level cell (SLC) technology
• Command set: ONFI NAND flash protocol
• Operation status byte provides software method for detecting: operation completion
• Pass/fail condition, write-protect status
• Ready/Busy# (R/B#) signal provides a hardware method of detecting operation completion
• RESET (FFh) required as first command after power-on
• Alternate method of device initialization (Nand-Init) after power up (contact factory)
• 3.3V (2.7 to 3.6V) operating voltage range
• 48-pin TSOP package, 0°C to +70°C commercial operating temperature range