您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
32000519A
RF MODULE, TRANSCEIVER, FSK, 868MHZ
產品總覽
3-2000519A module are fully programmable multichannel PLL based FSK transceiver, with dual IF conversion and software channel selection in the 868Mhz ISM bands. The typical transmission output power is 10mW ( +10dBm ) and the sensitivity in receive mode is 108dBm. The dual IF conversion, together with the SAW front end filter, allows for a highly selective module, with outstanding side channel noise immunity, ideal for industrial application and wireless RS232 and RS485 replacement. The transmitter output frequency can be set digitally by software and is stabilised by a closed loop control. The RSSI signal can be read by the software with great accuracy, so that the output power can be matched to the strength of the received RF signal, optimising power as a function of the required range.
- 868MHz FSK transceiver
- Typical power supply of 3.3V
- The module is based on a state of the art AT86RF211 transceiver
- Developed according to I-ETS-300-220 e and I-ETS-300-683 European Standard
- Very high noise immunity
- SAW front end filter and dual IF ceramic filter
應用
Industrial, Wireless, Communications & Networking, Consumer Electronics, Security, RF Communications
產品訊息
技術文件 (1)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
无库存
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
篩選工具