MP6610GS-P

MP6610 is a half-bridge driver with current measurement and regulation features. It can deliver up to 3A of output current across a wide 4V to 55V input voltage range. The MP6610 is designed to drive brushed DC motors, solenoids, relay and other loads. An internal current-sense circuit provides an output voltage that is proportional to the load current. The MP6610 also features cycle-by-cycle current limiting and regulation. These features do not require the use of a low-ohmic shunt resistor. Internal diagnostic and protection features include open-load detection (OLD), overcurrent protection (OCP), undervoltage lockout (UVLO) and thermal shutdown. It is available in SOIC-8 packages.

• Internal half-bridge driver
• Low on resistance: 100mohm high-side MOSFET (HS-FET), 120mohm low-side MOSFET (LS-FET)
• No control power supply required
• Simple, versatile logic interfaces
• Inputs compatible with 2.5V, 3.3V and 5V logic
• Fault indication output
• Thermally enhanced package

附註

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.