MCWR08X90R9FTL

MCWR08X90R9FTL is a MCWR08 series general purpose thick film chip resistor. The resistor is constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to within tolerance by laser cutting of this resistive layer. The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For ease of soldering the outer layer of these end terminations is a Tin (lead free) alloy. Typical applications include consumer electrical equipment, EDP, computer application and telecom application.

• Resistance is 90.9ohm and resistance tolerance is ±1%
• 0805 [2012 metric] case size
• Temperature coefficient is ±100ppm/°C
• Power rating is 125mW, voltage rating is 150V
• Operating temperature range from -55°C to 155°C