您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
OMEGA SA1-RTD-B
RTD Sensor, Class B, -73 °C to 260 °C, 100 ohm, Self-Adhesive or Stick-On or Cement-On
- 製造商：
- OMEGA OMEGA
- 製造商產品編號:
- SA1-RTD-B
- 訂購代碼：
- 2978146
-
- 產品範圍
- SA1-RTD-B Series
- 技術資料表:
- SA1-RTD-B 数据表
- ECAD / MCAD
-
產品總覽
SA1-RTD-B series is a 3-pack surface-mount fast response RTD sensor. This surface temperature sensor that can be applied to most clean, dry surfaces. Just peel off the release sheet on the bottom of the sensor and the silicone adhesive bonds the sensor to the surface, no cements or epoxies to mix, apply and cure. The thin design of the SA1-RTD minimizes the effects of having the sensor attached to the surface of interest. Containing a thin film platinum sensing element, the SA1-RTD resistance is not affected by mounting to curved surfaces. With a fast thermal response time, the SA1-RTD will quickly respond to changes in temperature for fast, reliable measurements.
- Silicone adhesive rated to 260°C
- Temperature range from -73 to 260°C
- Colour code per IEC-60751 and ASTM-E-1137
- 100.00 ohm ±0.12% at 0ºC resistance
- Number of wires are 3
- 1016mm length
產品訊息
技術文件 (1)
28 有存貨 需要更多？
×
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
下訂即可添購更多存貨 依照供應商前置時間，預計約 2024/2/26
28 新加坡 有庫存，可在 1-2 個工作日內發貨
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
篩選工具