BD7280YG-CTR

BD7280YG-CTR is a rail-to-rail input/output monolithic IC integrated single independent CMOS operational amplifier on a single chip. It features high slew rate, low noise and low input bias current. It is suitable for automotive requirements such as engine control unit, electric power steering, anti-lock braking system, sensor amplifier, and so on. Furthermore, this circuit type does not oscillate even with a capacitance of 1nF. Set design is possible without worrying about oscillation due to output capacitance. It is used in applications such as engine control unit, electric power steering (EPS), anti-lock braking system (ABS), automotive electronics, sensor amplifiers, battery-powered equipment, current monitoring amplifier, ADC front ends, buffer amplifier, photodiode amplifier, amplifiers.

• Nano Cap™ integrated op-amp, AEC-Q100 qualified, shutdown function
• Single supply voltage range rom 2.5V to 5.5V, dual supply voltage range from ±1.25V to ±2.75V
• Input offset voltage is 2mV maximum at (VS = 5V, VSS = 0V, VICM = 2.5V)
• Input bias current is 0.5pA typical at (VS = 5V, VSS = 0V, VICM = 2.5V)
• Supply current is 2.6mA typical at (VS = 5V, VSS = 0V, VICM = 2.5V)
• Gain bandwidth product is 7MHz typical at (G = 40dB, CL = 25pF)
• Slew rate is 10V/μs typical at (CL = 100pF, VS = 5V, VSS = 0V, VICM = 2.5V)
• Total harmonic distortion +noise is 0.001% typical at (VOUT = 4Vp-p, f = 1KHz)
• Input-referred noise voltage density is 12nV/√Hz typical at (f = 1KHz)
• Operating temperature range from -40°C to +125°C, SSOP6 package