您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

產品未必與您的搜尋完全相符

您先前購買過這項產品。 檢視歷史記錄

 
 

SRK2000DTR

Secondary Side Synchronous Rectifier Driver, 4.5 V to 32 V in, SOIC-8

STMICROELECTRONICS SRK2000DTR
×
×

圖片僅供舉例說明。 請參閱產品描述。

製造商產品編號:
SRK2000DTR
訂購代碼:
2460837RL
技術資料表:
SRK2000DTR   Datasheet
查看所有技術文件

產品總覽

The SRK2000DTR is a Smart Driver implements a control scheme specific to secondary-side synchronous rectification in LLC resonant converters that use a transformer with center-tap secondary winding for full-wave rectification. It provides two high current gate drive outputs, each capable of driving one or more N-channel Power MOSFETs. Each gate driver is controlled separately and an interlocking logic circuit prevents the two synchronous rectifier MOSFETs from conducting simultaneously. The control scheme in this IC allows for each synchronous rectifier to be switched on as the corresponding half-winding starts conducting and switched off as its current goes to zero. A unique feature of this IC is its intelligent automatic sleep mode. It allows the detection of a low-power operating condition for the converter and puts the IC into a low consumption sleep mode where gate driving is stopped and quiescent consumption is reduced.
  • Secondary-side synchronous rectifier controller optimized for LLC resonant converters
  • Protection against current reversal
  • Safe management of load transient, light load and startup condition
  • Intelligent automatic sleep mode at light load
  • Dual gate driver for N-channel MOSFETs with 1A source and 3.5A sink drive current
  • Programmable UVLO with hysteresis
  • 250µA Quiescent consumption
  • Operating frequency up to 500kHz

應用

Signal Processing, Computers & Computer Peripherals, Power Management, Industrial

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
Secondary Side Synchronous Rectifier Driver

:
4.5V

:
32V

:
SOIC

:
8Pins

:
-40°C

:
150°C

:
-

:
-

:
MSL 3 - 168 hours
尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (2)

CAD 下載

×

條款與條件

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消
包裝類型 複捲式包裝
  提供其他包裝選項
條帶式包裝 :2460837 查看存貨

1,194 有存貨 需要更多?

1,194 UK 有庫存,可在 3-4 個工作日內發貨

NT$65.16

不提供定價。 請聯絡客戶服務

價格
件(切割供貨)
多項: 1 最少: 100
數量 價格 您的價格
 
 
100+ NT$65.16
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
250+ NT$61.81
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
500+ NT$55.46
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
1000+ NT$55.16
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 新增至購物車 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --
100 (條帶式包裝 2460837) x 65.16 = NT$6,516.00
總價: NT$6,516.00
100 (複捲式包裝 2460837RL) x 65.16 = NT$6,516.00
總價: NT$6,516.00
選擇您的包裝偏好
2460837
注意:偏遠倉庫可能提供不同包裝選項的出貨。 請查看每一包裝選項的送貨和交貨期資訊。