Development Kit, ST25DV04 Dynamic NFC/RFID Tag IC, Fast Transfer Mode Capability
- Two ready to use printed circuit boards (PCB)
- MB1283 with STM32F415VGT6 LQFP100 32bit MCU, LCD colour screen (320x200 pixels), touch screen driver
- Different colour LEDs (power, user, ST link), user push button, joystick for menu selection
- Reset button, onboard ST link for microcontroller firmware upgrade and debug, ST link mini USB
- User micro USB, USB micro or mini connector for board powering
- Demonstration use cases stored in memory
- MB1284 with 45mm x 75mm, 13.56MHz inductive antenna etched on the PCB
- I2C interface connector
- Energy harvesting output (VOUT) with a 10nF capacitance filtering circuit
- GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing
Embedded Design & Development
MB1283 (ST25DX_Discovery_Mboard) mother board, MB1284 (ST25DV_Discovery_ANT_C1) daughter board.
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
10 有存貨 需要更多？
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
將於 2023/1/6 再提供 2 件