Oscilloscope Probe, Passive, 50 MHz, 300 V, 10:1, Tektronix 1Mohm, 20pF Input BNC Oscilloscopes
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
- 10X attenuation
- DC to 50MHz bandwidth
- Cable length is 1.3m (4.2ft)
- UL61010-031, CAN/CSA C22.2 No. 61010-031-07, IEC61010-031, IEC 61010-031/A1:2008 approved
- Rise time is typically less than 7ns
- Compensation range from 15pF to 25pF
- Input resistance is 10Mohm and 6.1ns propagation delay
- Input capacitance is typically less than 12pF
- Maximum input voltage is 300Vrms (CAT II)
- Operating temperature range from 10°C to 55°C (14°F to 131°F)
Test & Measurement, Power Management
TPP0051 passive voltage probe, Adjustment tool (003-1433-xx), Retractable hook tip (013-0362-xx), Five pairs colour bands (016-0633-xx), 2 each Long ground spring (016-2028-xx), 6inch crocodile ground lead (196-3521-xx 6).
39 有存貨 需要更多？
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
下訂即可添購更多存貨 依照供應商前置時間，預計約 2021/11/15