您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

產品未必與您的搜尋完全相符

您先前購買過這項產品。 檢視歷史記錄

 
 

NE555PWR

Timer IC, Timing Microseconds to Hours, Astable, Monostable, 4.5 V to 16 V, 200 mA out, TSSOP-8

TEXAS INSTRUMENTS NE555PWR
×
×

圖片僅供舉例說明。 請參閱產品描述。

製造商產品編號:
NE555PWR
訂購代碼:
3121194

產品總覽

The NE555PWR is a Precision Timer capable of producing accurate time delays or oscillation. In the time-delay or mono-stable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the a-stable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor. The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset and the output goes low.
  • Timing from microseconds to hours
  • Astable or monostable operation
  • Adjustable duty cycle
  • TTL-compatible output can sink or source up to 200mA
  • Compliant to MIL-PRF-38535
  • Green product and no Sb/Br

應用

Clock & Timing, Aerospace, Defence, Military

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
100kHz

:
4.5V

:
16V

:
TSSOP

:
8Pins

:
0°C

:
70°C

:
-

:
MSL 1 - Unlimited
尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (0)

CAD 下載

×

條款與條件

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消
包裝類型 條帶式包裝

開放補貨預購

依照供應商前置時間有更多存貨可提供,預計約 2023/1/30

由於市場條件的影響,交貨時間僅供一般指導,可能會在短時間內發生變化

有貨時通知我

NT$11.63

不提供定價。 請聯絡客戶服務

價格
件(切割供貨)
多項: 5 最少: 5
數量 價格 您的價格
 
 
5+ NT$11.63
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
100+ NT$8.88
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
500+ NT$6.12
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 新增至購物車 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --