您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
75-245327
Plastic Enclosure, Handheld, ABS, 150 mm, 80 mm, 30 mm, IP66
產品訊息
技術文件 (1)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
產品總覽
The 75-245327 is a VERONEX EMC Case with battery compartment for protection from potentially damaging E and H field interferences. The moulding has been coated with copper silver paint (25 to 50m) and the tongue and groove joints ensure good continuity along the enclosure. The end panel is also uniquely retained to ensure good electrical contact when coating is applied. Good adhesion is achieved on plastic substrate and the copper silver is resistant to atmospheric oxidation and corrosion. Coating is applied by conventional spraying technique using electroform masks for precise selectivity of coverage.
- UL94V-0 Flammability rating
應用
Industrial
內容
Base moulding, Top moulding, 2x Moulded end panels, 4x Case fixing screws, 4x Self adhesive feet, 4x Self tapping PCB screws and Battery cover.
開放補貨預購
依照供應商前置時間有更多存貨可提供，預計約 2022/9/19
×
6
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
篩選工具