ADA4350ARUZ

ADA4350 is an analogue front end with ADC driver for photodetectors or other sensors whose output produces a current proportional to the sensed parameter or voltage input applications where the system requires the user to select between very precise gain levels to maximize the dynamic range. This integrates a FET input amplifier, a switching network, and an ADC driver with all functions controllable via a serial peripheral interface (SPI) or parallel control logic into a single IC. The FET input amplifier has very low voltage noise and current noise making it an excellent choice to work with a wide range of photodetectors, sensors, or precision data acquisition systems. Application includes current to voltage (I to V) conversions, photodiode preamplifiers, chemical analysers mass spectrometry, molecular spectroscopy, laser/LED receivers, and data acquisition systems.

• Low noise, low input bias current FET input amplifier
• Very low input bias current is ±0.25pA typical at 25°C
• Typical input voltage noise is 92nV/√Hz (f=10Hz, TA=25°C)
• Typical bandwidth -3dB is 15MHz (G=−5, VOUT=200mV p-p, TA=25°C)
• Typical slew rate is 30V/µs (VOUT=2V step, 10% to 90%, TA=25°C)
• Operating range from 3.3 to 12V (TA=25°C, +VS=5V, −VS=0V, RF=1Kohm)
• Typical harmonic distortion (HD2/HD3) is −95/−104dBc (G=−5, fC=100KHz)
• Temperature rating range from -40°C to +85°C
• 28-lead thin shrink small outline package [TSSOP]

附註

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party