
| 製造商 | ANALOG DEVICES |
|---|---|
| 製造商產品編號 | ADXL363BCCZ-RL7复制 |
| 製造商標準前置時間 | 12 週 |
| 訂購代碼 | 條帶式包裝4333205RL 條帶式包裝4333205 |
| 您的零件号 | |
| 技術資料表 |
需要更多?
| 數量 | 價格 |
|---|---|
| 10+ | NT$331.430 |
| 25+ | NT$316.040 |
| 100+ | NT$295.870 |
| 250+ | NT$290.560 |
| 500+ | NT$285.250 |
產品訊息
| 製造商 | ANALOG DEVICES |
|---|---|
| 製造商產品編號 | ADXL363BCCZ-RL7复制 |
| 製造商標準前置時間 | 12 週 |
| 訂購代碼 | 條帶式包裝4333205RL 條帶式包裝4333205 |
| 技術資料表 | |
| MEMS Sensor Output | Digital |
| Sensing Range - Accelerometer | ± 2g, ± 4g, ± 8g |
| Sensing Axis | X, Y, Z |
| Output Interface | SPI |
| Sensor Case / Package | LGA |
| No. of Pins | 16Pins |
| Sensor Case Style | LGA |
| Sensitivity Typ | 1mg/LSB, 2mg/LSB, 4mg/LSB |
| Supply Voltage Min | 1.6V |
| Supply Voltage Max | 3.5V |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 85°C |
| Qualification | - |
| Product Range | - |
| SVHC | No SVHC (04-Feb-2026) |
產品總覽
ADXL363BCCZ-RL7 is an ultralow power, a three-sensor combination consisting of a 3-axis MEMS accelerometer, a temperature sensor, and an on-board analogue-to-digital converter (ADC) input for synchronous conversion of an external signal. The entire system consumes less than 2µA at a 100Hz output data rate and 270nA when in motion-triggered wake-up mode. It communicates via a serial port interface (SPI) and always provides 12bit output resolution for all three sensors. In addition to the accelerometer and temperature sensor, this device also provides access to an internal ADC for synchronous conversion of an additional analogue input. It operates on a wide 1.6V to 3.5V supply range, and can interface, if necessary, to a host operating on a separate, lower supply voltage. It is used in applications such as home healthcare devices, wireless sensors, motion motion-enabled metering devices.
- Accelerometer, temperature sensor, and provision for third analogue sensor input
- Built-in features for motion-based system level power savings
- Adjustable threshold sleep/wake modes for motion activation
- Deep embedded FIFO minimizes host processor load
- Awake state output enables implementation of standalone, motion activated switch
- Power can be derived from coin cell battery, SPI digital interface
- Supply current (measurement mode) is 1.95µA typical at (TA = 25°C, VS = 2V)
- Differential nonlinearity is ±1.8LSB typical at (VS = 1.6V)
- Gain error is -4.3LSB typical at (VS = 1.6V)
- Operating temperature range from -40°C to +85°C, 16-terminal LGA package
附註
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
技術規格
| MEMS Sensor Output | Digital |
|---|---|
| Sensing Axis | X, Y, Z |
| Sensor Case / Package | LGA |
| Sensor Case Style | LGA |
| Supply Voltage Min | 1.6V |
| Operating Temperature Min | -40°C |
| Qualification | - |
| SVHC | No SVHC (04-Feb-2026) |
| Sensing Range - Accelerometer | ± 2g, ± 4g, ± 8g |
|---|---|
| Output Interface | SPI |
| No. of Pins | 16Pins |
| Sensitivity Typ | 1mg/LSB, 2mg/LSB, 4mg/LSB |
| Supply Voltage Max | 3.5V |
| Operating Temperature Max | 85°C |
| Product Range | - |
技術文件 (1)
法規與環境保護
| 原產地: 承擔產品生產最後程序之國家原產地: | South Korea 承擔產品生產最後程序之國家 |
|---|---|
| 關稅編號: | 85423990 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| 符合 RoHS 規定: | 是 RoHS |
| 符合 RoHS 鄰苯二甲酸酯類規定: | 是 RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| 下載產品合規憑證 | 產品合規憑證 |
| 重量 (公斤): | .00001 |
