LT1012IS8#PBF

LT®1012 is an internally compensated universal precision operational amplifier which can be used in practically all precision applications. This combines picoampere bias currents, microvolt offset voltage, low voltage and current noise, and low power dissipation. This achieves precision operation on two Ni-Cad batteries with 1mW of power dissipation. Extremely high common mode and power supply rejection ratios, practically unmeasurable warm-up drift, and the ability to deliver 5mA load current with a voltage gain of one million round out the LT1012’s superb precision specifications. The all-around excellence of the LT1012 eliminates the necessity of the time consuming error analysis procedure of precision system design in many applications. Applications include replaces OP-07 while saving power, precision Instrumentation, charge integrators, wide dynamic range logarithmic amplifiers, light meters, low frequency active filters, thermocouple amplifiers.

• 15µV typical input offset voltage (VS = ± 15V, VCM = 0V, TA = 25°C)
• 0.4µV/month typical long term input offset voltage stability (VS = ± 15V, VCM = 0V, TA = 25°C)
• 50pA typical input offset current (VS = ± 15V, VCM = 0V, TA = 25°C)
• Typical input bias current is ±80pA (VS = ± 15V, VCM = 0V, TA = 25°C)
• 132dB typical common mode rejection ratio (VCM = ±13.5V)
• 132dB typical power supply rejection ratio (VS = ±1.2V to ± 20V)
• Typical input voltage is ±14.0V (VS = ± 15V, VCM = 0V, TA = 25°C)
• Typical output voltage swing is ±14V (VS = ± 15V, VCM = 0V, TA = 25°C)
• 0.2V/µs typical slew rate (VS = ± 15V, VCM = 0V, TA = 25°C)
• 8 lead plastic SO package, operating temperature range from 0°C to 70°C

附註

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party