LT3650IMSE-8.4#PBF
Battery Charger, Li-Ion/Li-Pol, 2 Cell, 32 V Input, 8.4 V/2 A Charge, -40 to 85 Deg C, MSOP-EP-12
需要更多?
| 數量 | 價格 |
|---|---|
| 1+ | NT$339.460 |
| 10+ | NT$266.670 |
| 37+ | NT$241.990 |
| 111+ | NT$227.240 |
| 259+ | NT$218.590 |
| 518+ | NT$212.890 |
產品訊息
| 製造商 | ANALOG DEVICES |
|---|---|
| 製造商產品編號 | LT3650IMSE-8.4#PBF复制 |
| 製造商標準前置時間 | 12 週 |
| 訂購代碼 | 4027801 |
| 技術資料表 | |
| Battery Type | Li-Ion, Li-Pol |
| Input Voltage | 32V |
| Battery Charge Voltage | 8.4V |
| Charge Current | 2A |
| IC Case / Package | MSOP-EP |
| No. of Pins | 12Pins |
| No. of Cells | 2Cells |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 85°C |
| IC Mounting | Surface Mount |
| Product Range | - |
| MSL | MSL 1 - Unlimited |
| SVHC | No SVHC (04-Feb-2026) |
產品總覽
LT3650-8.4 is a complete monolithic 2-cell li-Ion/polymer battery charger that operates over a 9V to 32V input voltage range (11.5V minimum start-up voltage). It provides a constant-current/constant-voltage charge characteristic, with maximum charge current externally programmable up to 2A, set using an external current sense resistor. A precondition feature trickle-charges a low voltage battery, and bad-battery detection provides a signal and suspends charging if a battery does not respond to preconditioning. It can be configured to terminate charging when charge current falls to C/10, or one-tenth the programmed maximum current. An auto-restart feature starts a new charging cycle if the battery voltage drops 2.5% from the float voltage, or if a new battery is inserted into a charging system. Applications includes industrial handheld instruments, 12V to 24V automotive and heavy equipment, desktop cradle chargers and notebook computers.
- Contains a user-programmable internal safety timer (typically set to a three hour full cycle time)
- User-selectable termination: C/10 or on-board termination timer
- Dynamic charge rate programming/soft-start pin, programmable input current limit
- 1MHz fixed frequency, average current mode control, 0.5% float voltage accuracy
- 5% charge current accuracy, 2.5% C/10 detection accuracy, NTC resistor temperature monitor
- Auto-recharge at 97.5% float voltage, auto-precondition at <lt/>70% float voltage
- Bad-battery detection with auto-reset, binary coded open-collector status pins
- Typical battery float voltage of 8.4V
- Battery precondition threshold voltage of 5.8V
- 12-lead plastic MSOP package, -40°C to 85°C temperature range
附註
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
技術規格
| Battery Type | Li-Ion, Li-Pol |
|---|---|
| Battery Charge Voltage | 8.4V |
| IC Case / Package | MSOP-EP |
| No. of Cells | 2Cells |
| Operating Temperature Max | 85°C |
| Product Range | - |
| SVHC | No SVHC (04-Feb-2026) |
| Input Voltage | 32V |
|---|---|
| Charge Current | 2A |
| No. of Pins | 12Pins |
| Operating Temperature Min | -40°C |
| IC Mounting | Surface Mount |
| MSL | MSL 1 - Unlimited |
法規與環境保護
| 原產地: 承擔產品生產最後程序之國家原產地: | Malaysia 承擔產品生產最後程序之國家 |
|---|---|
| 關稅編號: | 85423990 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| 符合 RoHS 規定: | 是 RoHS |
| 符合 RoHS 鄰苯二甲酸酯類規定: | 是 RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| 下載產品合規憑證 | 產品合規憑證 |
| 重量 (公斤): | .000001 |

