LT4356MPS-1#PBF

LT4356-1 surge stopper protects loads from high-voltage transients. It regulates the output during an overvoltage event, such as a load dump in automobiles, by controlling the gate of an external N-channel MOSFET. The output is limited to a safe value thereby allowing the loads to continue functioning. The auxiliary amplifier may be used as a voltage detection comparator or as a linear regulator controller driving an external PNP pass transistor. Application includes automotive/avionic surge protection, hot swap/live insertion, high side switch for battery powered systems, intrinsic safety applications.

• Stops high voltage surges
• Adjustable output clamp voltage
• Overcurrent protection
• Adjustable fault timer
• Controls N-Channel MOSFET
• Fault output indication
• Operating voltage range from 4 to 80V (TA = 25°C, VCC = 12V)
• Typical FB Pin servo voltage is 1.25V (VGATE = 12V; VOUT = 12V, TA = 25°C)
• 16-lead plastic SO package
• Temperature rating range from -55°C to 125°C

附註

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party