ACS10S220RJ

The ACS10S series from Arcol/Ohmite are silicone coated axial leaded resistors. Design of the ACS resistor provides a good balance of power density, stability and resistance to environment for a broad range of industrial power applications such as drives and controls. Resistance range include E24 and E12 decade values (for values <gt/>10K).

• Inductive resistance range of 0.1ohm to 30Kohm & non inductive resistance range of 0.1ohm to 5Kohm
• Body diameter is 8.52mm (±0.8) and 1mm (±0.02) drill hole
• 35mm (±1) lead length and 44.2mm (±1.5) body length
• Operating temperature range from -55°C to 350°C
• Good ratio between power capability and physical size
• Wound to maximise high pulse capability, low inductive versions available
• Temperature coefficient of resistance wire is ±20ppm
• Available with ±1%, ±5% tolerance values
• Insulation resistance of 1000Mohm (<gt/> 100V) and dielectric withstand voltage is 500V
• Continuous working voltage is 700V and rated power is 10W
• High Power Resistor