Programmer, BX32P BARLINO II, Automatic Programming Start, Multi Programmer Control
- USB powered
- Chip auto identification
- Multi programmer control
- Automatic programming start
- Multi platform support
- Supported devices are very old NMOS EPROM, NMOS EPROM, EEPROM NV-RAM, FLASH, LPC, FWH, Firmware Hubs
- 32pin aries high quality ZIF socket
- USB 2.0 full speed 12Mb/s
- Chip ID test
- Low voltage support down to 3V
- Doubled firmware memory size: The BX32P Barlino II has enough place for future improvements and enlarged chip support
- Improve pin driving possibilities: The BX32P Barlino II can drive more pins with supplying and programming voltages as its predecessor
- Improved chip supply: The supply and programming voltages of the chips can now be set more accurately
Embedded Design & Development
Programmer, USB cable, Prog express software, manual (multi language) on CD.
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
27 有存貨 需要更多？
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
下訂即可添購更多存貨 依照供應商前置時間，預計約 2022/1/10