CY7C65213A-28PVXIT

CY7C65213A-28PVXIT is a USB-UART LP bridge controller. It provides a simple method to upgrade UART-based devices to USB with a minimal number of components. It also includes a USB 2.0 full-speed controller, a UART transceiver, an internal regulator, an internal oscillator. It has a built-in USB 2.0 full-speed transceiver. This transceiver incorporates an internal USB series termination resistor on the USB data lines and a 1.5k pull-up resistor on the USBDP. It is mainly used in application such as blood glucose meter, battery-operated devices, USB-to-UART cables, enables USB connectivity in legacy peripherals with UART, point-of-sale (POS) terminals, industrial and T&M (test and measurement) devices.

• Supports communication driver class (CDC), personal health care device class (PHDC)
• Battery charger detection (BCD) compliant with USB battery charging specification rev. 1.2
• Integrated USB termination resistors, single-channel configurable UART interfaces
• Data rates upto 3Mbps, 256bytes for each transmit and receive buffer
• Supports flow control using CTS, RTS, DTR, DSR, supports UART break signal
• General-purpose input/output (GPIO) 8pins, ESD protection is 2.2kV HBM
• 512-byte flash for storing configuration parameters
• Operating voltage is 1.71V to 5.50V, operating temperature range is -40°C to 85°C
• Packaging style is 28pin SSOP (10 × 7.5 × 1.65mm, 0.65mm pitch)
• 65 USB hubs, CMOS technology code