您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
DFR0486
Add-On Board, OLED Display, 1", 128 x 64, I2C Interface, Arduino, Gravity Series
產品訊息
技術文件 (1)
產品總覽
Gravity I2C OLED 2864 count display module is self-luminous with a blue background. The display areas is 0.96"and uses an IC SSD1306 chip. The OLED screen supports I2C communication and refresh rates of up to 60Hz. The module uses the gravity I2C common interface for easy plug and play usage (meaning you can connect it without the need for wires - just plug it straight in to your device). An OLED (organic light-emitting diode) has many advantages over traditional LCD displays, including a faster response speed, thinner profile, lower power consumption and excellent shock resistance. An OLED can be widely used in mobile devices for display applications. Used in conjunction with a mini Arduino-based microcontroller such as the Beetle or CurieNano.
- Metal bezel for ultimate protection
- 4 x M3 screw mount holes for simple installation
- Supports Arduino/Genuino 101 devices
- 3.3V to 5V operating voltage
- 128 columns X 64 rows pixels
- 60fps scanning rate
- 60cd /m2 (typ) brightness
- 22.75mA approx full screen power consumption
- 21.744 x 10.864mm / 0.85 x 0.43" display area
- 41.20 x 26.20mm/1.62 x 1.03" module size
內容
Gravity I2C OLED-2864 display module, Gravity I2C PH2.0-4P cable.
35 有存貨 需要更多？
×
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
下訂即可添購更多存貨 依照供應商前置時間，預計約 2023/11/27
35 英國 有庫存，可在 3-4 個工作日內發貨
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
篩選工具