您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
SEN0042
Digital Infrared Distance Sensor, 10cm, Arduino Development Boards
產品訊息
技術文件 (2)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
產品總覽
- Gravity digital infrared distance sensor (10cm)
- Used in edge detection sensor, intelligent mobile robotics platforms, home cleaning robots
- Help robot to detect edge of a precipice, preventing falling off a table or down the stairs
- This IR distance sensor is connected to an Arduino digital pin
- Supply voltage range from 2.7V to 6.2V, current is less than 10mA
- 2 to 10cm (low), less than 2cm or greater than 10cm (high) detecting distance
- Digital output interface
- VCC-0.6V (high) 0.6V (low) signal voltage
- Size is 36 x 10 x 15mm / 1.42 x 0.39 x 0.59inch, weight is greater than 5g
內容
10cm infrared sensor with breakout board, Digital sensor cable for Arduino.
22 有存貨 需要更多？
×
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
下訂即可添購更多存貨 依照供應商前置時間，預計約 2024/4/1
10 新加坡 有庫存，可在 1-2 個工作日內發貨
12 英國 有庫存，可在 3-4 個工作日內發貨
12 英國 有庫存，可在 3-4 個工作日內發貨
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
篩選工具