您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
DFROBOT TEL0138
USB GPS Receiver, Ublox, 56-Ch, 1.602 GHz, Raspberry Pi/ Lattepanda/ Jetson Nano, 2m Cable
產品訊息
技術文件 (1)
產品總覽
USB GPS receiver with 2m extension cable is an Ublox chip-based GPS receiver module of low power and high sensitivity that can receive 56 channels satellite signal. Compared with traditional GPS receivers, it brings much more accurate and faster positioning performance with stronger signal. Integrated with built-in receiving antenna, this product adopts a high-precision positioning chip and industrial-grade manufacturing process so that it can meet the positioning requirements of both industrial-grade and personal use. The GPS receiver has battery inside for supplying power for storing satellite data, such as satellite signal status, final position and time that would greatly increase the positioning speed at the module's next boot. Besides, this receiver adopts USB interface, which can be conveniently used in maincontrollers like Raspberry Pi, NVIDIA, LattePanda.
- Chip: UBX-G7020-KT
- Frequency: L1, 1575.42MHz/L2, 1561.10MHZ/L3,1602.00MHZ
- Baud Rate: 4800, 9600, 19200, 38400, 57600, 115200bps
- Sensitivity: tracking -162dBm; Acquisition: 160dBm; cold start: -148dBm
- Cold Start: 29s average, Warm Start: 3s average, Hot Start: 1s average
- Accuracy: horizontal position accuracy<2.5M, SBAS<2.0M
- Timing accuracy: 30ns
- Update rate: 1Hz
- Operating temperature range from -40⁰C to 85⁰C
內容
USB GPS receiver with 2m extension cable (compatible with Raspberry Pi/ LattePanda/ Jetson Nano) x1.
183 有存貨 需要更多？
×
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
下訂即可添購更多存貨 依照供應商前置時間，預計約 2024/1/8
183 英國 有庫存，可在 3-4 個工作日內發貨
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
篩選工具