您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

 
 

410-299

Programming Cable, All-in-one JTAG Programming/Debugging, 1.8V-5V Vref Drive, High Speed USB2 Port

410-299 - Programming Cable, All-in-one JTAG Programming/Debugging, 1.8V-5V Vref Drive, High Speed USB2 Port
410-299 - Programming Cable, All-in-one JTAG Programming/Debugging, 1.8V-5V Vref Drive, High Speed USB2 Port

圖片僅供舉例說明。 請參閱產品描述。

製造商:
DIGILENT DIGILENT
製造商產品編號:
410-299
訂購代碼:
2490176
技術資料表:
410-299   Datasheet
查看所有技術文件

產品總覽

The 210-299P-KIT is a JTAG-HS3 Programming Cable for use with Digilent development boards with Xilinx FPGAs and SOCs. The JTAG-HS3 programming cable is a high-speed programming/debugging solution for Xilinx FPGAs and SoCs. It is fully compatible will all Xilinx Tools and can be seamlessly driven from iMPACT, ChipScope™, EDK and Vivado™. The HS3 attaches to target boards using Xilinx's 2x7, 2mm programming header. The PC powers the JTAG-HS3 through the USB port and will recognize it as a Digilent programming cable when connected, even if the cable is not attached to the target board. The HS3 has a separate Vref pin to supply the JTAG signal buffers. The high speed 24mA three-state buffers allow the HS3 to drive target boards with signal voltages from 1.8 to 5V and bus speeds up to 30Mbps. To function correctly, the HS3's Vref pin must be tied to the same voltage supply (VCCO_0) that drives the JTAG port on the FPGA.
  • Uses micro_AB USB2 connector
  • Plugs directly into standard Xilinx JTAG header
  • Separate Vref drives JTAG signal voltages
  • Vref can be any voltage between 1.8 and 5V
  • Compatible with Xilinx ISE® 14.1 and newer, Xilinx Vivado 2013.3 and newer
  • Small, complete, all-in-one JTAG programming/debugging solution for Xilinx FPGAs and SoCs
  • High-speed USB2 port that can drive JTAG bus up to 30Mbps (frequency adjustable by user)

應用

Embedded Design & Development

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
Programming Cable

:
Digilent Development Boards with Xilinx FPGAs & SOCs

:
All-in-one JTAG Programming/Debugging, 1.8V-5V Vref Drive, High Speed USB2 Port, Micro-B Connector

:
-

尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (1)

暢銷品

145 有存貨 需要更多?

145 件可在 3 - 4 個工作日內出貨

NT$1,776.51

不提供定價。 請聯絡客戶服務

價格
每個
多項: 1 最少: 1
數量 價格 您的價格
 
 
1+ NT$1,776.51
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 無現貨,延期交貨 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --

客戶評論

客戶問答交流

社群

是否要查看其他客戶所提供有關此產品的資訊?

 查看社群成員的討論、網誌、文件。

篩選:

選擇您想要查看的文件類型,並按一下「套用篩選」按鈕
張貼問題給我們的專家發起討論,並獲得供應商專家和我們社群中資深工程師的回應。